BALBOA | 4.0 KW, 240 VOLT, 15" WITH PRESSURE SWITCH, 2" SLIP USED ON CATALINA SPAS LITE LEADER SYSTEMS | 50142

BALBOA | 4.0 KW, 240 VOLT, 15" WITH PRESSURE SWITCH, 2" SLIP  USED ON CATALINA SPAS LITE LEADER SYSTEMS | 50142

 OPTIMUS # 9711-224 BALBOA # 50142 GENERAL DESCRIPTION: THIS IS A 15", 2.25" DIAMETER STAINLESS STEEL FLOW THRU HEATER, PRESSURE SWITCH TYPE, WITH 2" SLIP UNION TAILPIECES. THE PRESSURE SWITCH AND SWITCH COVER ARE INCLUDED BASIC SPECIFICATIONS: LENGTH: 15" (LENGTH OF TUBE ONLY FROM FLANGE TO FLANGE) DIAMETER: 2.25" ENDS: FLANGED WITH UNIONS WATTAGE: 4.0 KW, 240 VOLTS (1.0 KW AT 120 VOLTS) TAILPIECES: (2) 2" SLIP TAILPIECES, REPLACEABLE UNION NUTS, GASKETS (THREADS ON 2" UNION TAILPIECES ACTUALLY MEASURE 3-1/16" DIAMETER) (INSIDE DIAMETER ON 2" SLIP TAILPIECE IS ACTUALLY 2-3/8")

DETAILED DIMENSIONS: TO USE THESE DIMENSIONS, THE HEATER SHOULD BE PLACED WITH THE ELEMENT TERMINALS AT THE TOP AND WITH THE END CLOSEST TO THE ELEMENTS ON THE LEFT SIDE. WITH THE HEATER IN THIS POSITION THE MEASUREMENTS SHOWN ARE FROM THE LEFT HAND METAL FLANGE ALL OF THE ITEMS SHOWN BELOW ARE IN LINE WITH THE ELEMENT LEADS ON THIS HEATER AT THE TOP ELEMENT LEADS: (2) THESE ARE REPLACEABLE AND INCLUDE ELECTRICAL CONNECTER NUTS AND WASHERS 1ST LEAD 4-1/4" FROM FLANGE 2ND LEAD 5-1/2" FROM FLANGE THERMOWELLS: EXTERNAL THERMOWELL MOUNT FOR A SINGLE SENSOR- THIS IS ON THE BOTTOM OF THE HEATER LEFT SIDE IS 6-3/8" FROM THE END LENGTH: 2-1/4" PRESSURE SWITCH TAP: 1/8" FEMALE THREADS (ACTUAL DIAMETER IS ABOUT 3/8") 13" FROM THE END FLANGE MOUNTING STUDS: NO MOUNTING STUDS

REPLACEMENT PARTS: ELEMENT:` 4.0 KW, 240V, UNIVERSAL STYLE, WITH HARDWARE 9138-004 TITANIUM 9138-007 TEFEL COATED PRESSURE SWITCH: THERE ARE NUMBER THAT MAY BE USED. THE ONE INCLUDED WITH THIS HEATER IS PRE-SET TO 1 PSI. 9711-112 1 PSI SETTING 9711-24 2 PSI SETTING 9170-14 UNIVERSAL, ADJUSTABLE UNIONS: 6227B 2" SLIP TAILPIECE 9711-213 SPLIT NUT WITH SCREWS 9175-40 GASKET, O-RING, 2-15/16" DIAMETER