BALBOA/VICO | IMPELLER, ¾ HP - NO STRIPE | PPUF7IMP

BALBOA/VICO | IMPELLER, ¾ HP - NO STRIPE | PPUF7IMP

VICO/BALBOA # 1212207
OLD VICO # PPUF7IMP

************************************************
GENERAL DESCRIPTION:

CLOSED FACE GRAY IMPELLER, 3/4 HP

THE INLET OPENING IS DOUBLE STEPPED ON THIS IMPELLER

THE SHAFT SIDE OF THE IMPELLER IS FLAT.
THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET

THIS DOESN'T HAVE ANY STRIPES ON THE SHAFT TO IDENTIFY THE IMPELLER LIKE ALL THE OTHER VICO IMPELLERS

************************************************
MATERIAL:
GRAY PLASTIC

TYPE: CLOSED FACE

NUMBER OF VANES: 5

************************************************
DIMENSIONS:

OUTSIDE DIAMETER 4" (A)

TOTAL LENGTH: 3-1/4"

OUTSIDE THICKNESS AT EDGE: 7/16" (B)
INSIDE THICKNESS AT EDGE: 3/16"

SHAFT LENGTH: 1-7/8"
SHAFT DIAMETER: 11/16"

INLET OPENING OUTSIDE DIAMETER: 2"
INLET OPENING INSIDE DIAMETER: 1-1/2"

THE SECOND STEP BELOW THE INLET IS 2-3/8" DIAMETER

INLET LENGTH: 3/4"
THE INLET IS 9/32".
THE SECOND STEP IS 15/32".

************************************************
MARKINGS:

STRIPES ON SHAFT
STARTING FROM THE END THESE ARE

NO STRIPES

SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH
NO STRIPES ON THE SHAFT OF ANY IMPELLER