HAYWARD | GASKET | SPX1094G

HAYWARD | GASKET | SPX1094G

GENERAL DESCRIPTION:
THIS IS A HAYWARD STANDARD SMALL SKIMMER FACEPLATE GASKET

MATERIAL:
CARDBOARD

SHAPE: RECTANGULAR WITH A TOTAL OF 10 SCREW HOLES AND 2 LARGER HOLES
THERE ARE 3 SCREW HOLES ON THE TOP AND THE BOTTOM
THERE ARE 2 SCREW HOLES AND ONE LARGER HOLE ON EACH SIDE.

*******************************************************************************
DIMENSIONS:

OUTSIDE LENGTH: 7-13/16" (A)
OUTSIDE HEIGHT: 7-9/16" (B)

INSIDE LENGTH: 5-7/8"
INSIDE HEIGHT: 5-5/8"

*******************************************************************************
SCREW HOLES: THESE ARE 1/4" IN DIAMETER
LARGE HOLES: THESE ARE 7/16" IN DIAMETER

TOP AND BOTTOM:
THERE IS A SCREW HOLE IN THE CENTER
THE 2 SCREW HOLES NEXT TO THE CENTER HOLE ARE 2-3/8" FROM THE CENTER HOLE

SIDE:
THERE IS A LARGE HOLE IN THE CENTER
THERE IS A SCREW HOLE ABOVE AND ONE BELOW THE CENTER HOLE
THE 1/4" SCREW HOLES ARE 1-7/8" APART AT THE CENTER

*******************************************************************************
MARKINGS:

THERE ARE NO MARKINGS

*******************************************************************************
SUBSTITUTES:

THE 4041-08A CARDBOARD GASKET WILL REPLACE THIS, BUT IS LARGER ON THE OUTSIDE
THE 9381-04 CARDBOARD GASKET WILL REPLACE THIS, BUT THE CENTER HOLE IS 1/4" AND
THIS GASKET IS SMALLER ON THE OUTSIDE

THERE SHOULD BE OTHERS, JUST CHECK THE HOLE PATTERN

NOTE DATE: 5-4-2009