HYDROQUIP | AIR BUTTON CONTROL SYSTEM | CS6009-US2

HYDROQUIP | AIR BUTTON CONTROL SYSTEM | CS6009-US2

GENERAL DESCRIPTION:

SPA CONTROL WITH HEATER
120V OR 240V CONVERTIBLE
AIR BUTTON TYPE CONTROL

THIS IS ONE OF THE CS6000 SLIDE SERIES SPA CONTROLS WHICH
IS MADE WITH A STAINLESS STEEL FLOW THRU "SLIDE" HEATER.

THE SLIDE FEATURE ALLOWS THE HEATER TO TO BE MOUNTED
FROM THE TOP TO THE BOTTOM OF THE CONTROL BOX.

**********************************************************
CIRCUITS / ELECTRICAL:

INPUT IS EITHER 120V OR 240V CONVERTIBLE

MAXIMUM AMPS FOR EACH CIRCUIT ARE SHOWN BELOW.
THE TOTAL AMPERAGE FOR ALL CIRCUITS MUST NOT EXCEED THE TOTAL
AMP RATING LISTED ON THE CONTROL BOX

THE LIGHT CIRCUIT IS 12V AND THE OTHERS ARE CONVERTIBLE 120V OR 240V

CIRCUITS INCLUDED:

PUMP 1: 2-SPEED 16 AMPS MAX
PUMP 2: SINGLE SPEED 16 AMPS MAX
BLOWER: YES 8 AMPS MAX
OZONE: YES 2 AMPS MAX
LIGHT: YES 1 AMP MAX
HEATER: 5.5 KW @ 240V 23 AMPS

1.375 KW @ 120V 11.5 AMPS
GFCI: NO

**********************************************************
SPASIDE CONTROL:

THERE IS A CIRCUIT AND RECEPTACLE FOR A STANDARD AIR BUTTON TYPE

THE SPASIDE CONTROL IS NOT REQUIRED BUT MAY BE ADDED
SEE RELATED ITEMS BELOW FOR OPTIONAL SPASIDES

OTHERS MAY BE USED IN ADDITION TO THESE

**********************************************************
DIMENSIONS:

LENGTH: 15"
HEIGHT: 11"
DEPTH: 6"

**********************************************************
INCLUDES:

4 AIR BUTTONS
AIR TUBING
8 FT, 12 VOLT TWIST-LOCK LIGHT HARNESS WITH BULB
(NO WALL FITTING OR REFLECTOR)

EQUIPMENT CORDS INCLUDED:
THESE ARE MOLDED, LIGHTED, 4 FOOT CORDS

2-SPEED PUMP CORD
1-SPEED PUMP 2 CORD

AIR BLOWER CORD
OZONATOR CORD

**********************************************************
RELATED ITEMS:
9246-15 OPTIONAL SPASIDE, 2, 3, OR 4 BUTTON
9246-16 OPTIONAL SPASIDE WITH LED TEMP DISPLAY, 2, 3, OR 4 BUTTON
9246-20 SPASIDE ADAPTOR PLATE, 8-5/16" x 3-5/16" OUTSIDE

9284-113
THIS IS THE SAME SYSTEM AS THE 9284-111, BUT IT ALSO INCLUDES
AN INSTALLED HIGH CURRENT GROUND FAULT INTERRUPTER