PENTAIR/PAC | O-RING | 273062

PENTAIR/PAC | PISTON SHAFT W/ WASHER | 273106

REPLACEMENT PARTS FOR MODEL 261165

 OPTIMUS # 4600-3106 PENTAIR # 273106 GENERAL DESCRIPTION: THIS IS THE SHAFT WITH SPACERS USED ON THE PENTAIR 26-1165 PUSH PULL VALVE THIS IS A SINGLE BLACK PLASTIC MOLDED PIECE, AND INCLUDES ONLY THE SHAFT AND 2 SPACERS. THE HANDLE AND TOP CAP ARE NOT INCLUDED WITH THIS ITEM SEE 4600-3241 FOR THE COMPLETE ASSEMBLY GENERAL INFO MATERIAL: SHAFT: BLACK PLASTIC SPACERS: BLACK PLASTIC TOP CAP: WHITE PLASTIC (NOT INCLUDED WITH THIS ITEM) HANDLE: BLACK PLASTIC (NOT INCLUDED WITH THIS ITEM) DIMENSIONS: LENGTH: 16-3/8" (INCLUDING HANDLE) LENGTH: 13" (A) (WITHOUT HANDLE) SHAFT DIAMETER: 9/16" (B) (AT THE HANDLE END,TAPERS DOWN TO 7/16" AT THE OTHER END SPACERS: TOTAL # 2 SPACERS INCLUDED DIAMETER: 1-15/16" THICKNESS: 15/32" FROM OUTSIDE TO OUTSIDE GROOVE: 5/16" SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 7-1/2" SPACER O-RINGS: (NOT INCLUDED WITH THIS ITEM) THESE ARE STRETCHED ON TO THE SPACERS SO THE DIMENSIONS SHOWN ARE FOR THE ORIGINAL O-RINGS BEFORE THEY ARE STRETCHED OUTSIDE DIAMETER: 1-7/8" INSIDE DIAMETER: 1-1/2" HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 3/16" AT 5/16" FROM END INCLUDES: SHAFT WITH 2 SPACERS (ALL ONE SINGLE MOLDED PIECE) MARKINGS: "PISTON ASSEMBLY 27-3241" MOLDED ONTO THE SHAFT