THERMCORE PRODUCTS | STANDARD | 9138-015

THERMCORE PRODUCTS | STANDARD | 9138-015

OPTIMUS # 9138-001 THERMPRODUCTS # 25-4034-TEP GENERAL DESCRIPTION: THIS IS A STANDARD TRIPLE BEND FLOW THRU ELEMENT, LOW PROFILE THIS HAS THE CONNECTORS PLACE IN THE CENTER OF THE ELEMENT BOTH ENDS OF THE ELEMENT ARE OPEN, SO THIS WILL WORK WELL WITH HEATERS THAT HAVE AN INTERNAL SENSOR OR THERMOWELL. THE INSIDE LOOP AT EACH END COMES IN ABOUT 3-1/4" FROM THE END OF THE ELEMENT THIS IS ALSO A VERY LOW PROFILE ELEMENT FROM TOP TO BOTTOM KW: 5.5 KW @ 240 VOLTS (1.4 KW @ 120 VOLTS) MATERIAL: STANDARD ****************************************************************************** DIMENSIONS: LENGTH: 9-1/2" TOTAL WIDTH: 1-1/2" MAXIMUM HEIGHT: 2-1/8" TOTAL TO TOP OF ELEMENT LEADS 1-3/4" FROM BOTTOM OF ELEMENT TO TOP OF BULKHEAD FITTING (THIS IS WHERE THE ELEMENT ATTACHES TO THE HEATER TUBE ON THE INSIDE) TERMINALS: STANDARD O-RING TYPE BULKHEAD FITTINGS THESE ARE PLACED EXACTLY IN THE CENTER OF THE ELEMENT THE SPACING BETWEEN THE CENTER OF THE 2 TERMINALS IS ABOUT 1-3/8" (THIS WILL VARY JUST A LITTLE SINCE THERE IS A LITTLE FLEX TO THE ELEMENT) EACH TERMINAL IS ABOUT 4-1/16" FROM THE END OF THE ELEMENT ALL OF THE MOUNTING HARDWARD IS INCLUDED