WMC/PPC | WET END LESS 2 IMPELLER ADD IMPELLER TO COMPLETE | ATWE

WMC/PPC | WET END LESS 2” IMPELLER ADD IMPELLER TO COMPLETE | ATWE

The "Wmc/Ppc ATWE Wet End Less 2" is a critical component in fluid handling systems, often utilized in applications such as pumping stations or cooling systems. This unique product is often required to boost performance and extend the longevity of such systems. 

The 'wet end' refers to the part of the pump that comes in direct contact with the fluid being pumped, usually housing the impeller, casing, and seals.

The "2" Impeller, an essential piece to complete the wet end, is designed to create centrifugal force. This force propels the fluid through the pump and out into the system, ensuring efficient operation. 

This is designed to work with 56j frame threaded motors to complete this wet end. Just order the correct impeller to match the motor horsepower.

However, like any mechanical component, impellers can wear out or become damaged over time.

In such cases, a replacement process is required. To install a new impeller, the pump casing is first opened. 

The old impeller is then removed and replaced with the "2" Impeller. Once the impeller is seated properly, the casing is reassembled, ensuring all seals are properly aligned to prevent leaks.

Regular maintenance of the "Wmc/Ppc ATWE Wet End Less 2" and its impeller involves periodic inspections for wear and damage. 

Replacing the impeller before severe wear occurs is suggested to avoid costly and inconvenient system failures. Remember, preventative maintenance is always more cost-effective than reactionary repairs.

Includes: 

(4) at-1600-d hand knob
(4) ss-1600-n hand knob swivel
(1) at-1600-dc strainer cover
(1) at-1600-s strainer cover gasket
(1) ss-1600-m strainer basket
(2) ss-1600-v drain plugs
(1) at-1600-aa pump housing
(1) ss-1600-r diffuser gasket
(1) ss-1600-b diffuser
(1) ss-1600-z2 shaft seal
(1) ss-1600-t housing gasket
(1) at-2600-e seal plate
(1) at-1600-f mounting plate
(4) ss-1600-z-4 housing cap screw
(4) ss-125-z-4 motor cap screw
(8) Stainless steel washers for cap screws
(1) at-1600-g mounting foot
(1) at-1600-j mounting foot - opposite side
(4) Mounting foot screws

Not included impellers - order separately

1/2 hp ss-6142-i 5150-10a
3/4 hp ss-6162-i 5150-10b
1 hp ss-6182-i 5150-10c
1 1/2 hp ss-6222-i 5150-10d
2 hp 22-6262-i 5150-10e
2 1/2 hp ss-5062-i 5150-10f

Features:

• Streamlined Design: Engineered for optimum fluid handling and space economy.
• High Durability: Constructed to withstand harsh environments and continuous operation.
• Efficient Operation: The "2" Impeller ensures effective fluid propulsion for system efficiency.
• Easy Installation: Designed for hassle-free impeller replacement and maintenance.
• Seal Compatibility: Aligns perfectly with standard seals to prevent leaks.
• Preventive maintenance Friendly: Allows for easy and regular inspections.
• Cost-Efficient: Built for longevity, reducing the frequency of replacements and repairs.

Product Specifications

Frequently Asked Questions

What is the main function of the Wmc/Ppc ATWE Wet End Less 2" in a system? 

The Wmc/Ppc ATWE Wet End Less 2 is vital to fluid handling systems. It directly interacts with the pumped fluid, efficiently operating applications like pumping stations or cooling systems.

How do I install a new 2" Impeller in the Wmc/Ppc ATWE Wet End Less 2? 

To install a new 2" Impeller, open the pump casing, remove the old impeller, and replace it with the new one. Ensure the impeller is seated properly before reassembling the casing and aligning the seals.

What are some common signs that the 2" Impeller needs to be replaced? 

Common signs that the 2" Impeller needs replacement include decreased system efficiency, unusual noise from the pump, or visible wear and tear on the impeller.

What precautions should I take while handling the Wmc/Ppc ATWE Wet End Less 2 and the "2" Impeller? 

Always ensure the pump is disconnected from power before opening the casing. Handle the impeller carefully to avoid damage and ensure all seals are correctly aligned during reassembly.

How does the Wmc/Ppc ATWE Wet End Less 2 align with standard seals? 

The Wmc/Ppc ATWE Wet End Less 2 is designed to align perfectly with standard seals, ensuring a tight fit to prevent fluid leaks.